Hello everybody, today I wanted to talk a little bit about the software module interface system and some of the problems I'm trying to figure out. In the end I will also give some quick updates about the hardware. [...] Read more

Hello! Just wanted to quickly update on some software development. After soldering everything and testing all power electronics, I decided to move onto software development to start testing the radio communication and [...] Read more

Hello! I finished soldering the CLU and E22E28 radio modules. Wired up all the essentials and printed a temporary structure that can hold the CLU and PSU together. I will soon add support for the E22E28 module. This is [...] Read more

I have finished soldering two PSU in different configurations. On the left you have the 3 rail config that supports the use of the LTE/5G 3.8V modem, on the right the configuration with just 5V and 3.3V. Soldering the [...] Read more

PCBs and components have arrived! I will shortly start assembling the CLU and PSU. After they are assembled I will run quick tests to verify everything works as it should, power-wise, and move onto software development. [...] Read more

PCBs are in production. The specific revisions I sent to produce are: CLU rev1.2 E22E28MOD rev1.2 NGFFUSB rev1.1 PSU rev1.4 I also ordered most components needed for assembly and testing of the CLU, E22E28MOD and PSU. [...] Read more

Hello, This is the first post here. I'm going to use this blog to post semi-regularly about the current status of the project. This is going to be lower effort than the GitHub page so keep that in mind when skimming [...] Read more